Super Thin Dry Use Diamond Saw Blade Cutting Disc for Tile Ceramic Stone

• Customization: Available
• Certification: ISO9001:2008, ISO9001:2000, RoHS, CE, ISO9001 /MPa
• Diameter: 105mm-230mm
• Model NO.: TOPX65
• Type: Hot Press Diamond Saw Blade
• Blade Diameter: 18in, 5in
• Blade Length: 6in
• Size: 105mm-230mm
• Quality Standard: European Standard En13236
• Product Name: Turbo Diamond Circular Saw Blade
• Advantage: High Cutting Efficiency,Operator Safety
• Blade Thickness: 0.032in
• Arbor Size: 7/8in, 5/8in
• Segment Height: 10mm
• Inner Hole: 20mm,22.23mm,Flange M14
• Teeths: 140
• Application: Cuttin Granite, Marble, Quartz,Other Stones
• Finishing: Ti-Coated
• Blade Width: 1/4in
• Teeth Per Inch: 10
• Transport Package: White Box
• Trademark: TOP
• Origin: Fujian, China
• HS Code: 82075010
• Production Capacity: 50000 PCS/Month

Product Description

Product Description

TOP tile cutter blade can be used dry or wet, fits most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor.
* Wet or dry cutting.
* cooler rim increases lfie and cutting speed.
* Super thin porcelain saw blade with free chips for cutting,Match with hand-held machine.
* Available for cutting porcelain,ceramic tile,granite,sandstone quartz ect.


Why TOP
TOP specializes in products and solution for professionals. We are focus on providing high-quality and practical home & kitchen products such as diamond saw blades, circular saws, cutting wheels and polishing pads for angle grinder.

• Instructions Before use, make sure that the saw blade is not damaged. If it is damaged, it is strictly forbidden to use. When assembling, the motor shaft is matched with the center of the saw blade, and the error must be less than 0.1mm.
• Note that the direction of the arrow marked on the saw blade is the same as the direction of rotation of the tool used. When cutting, please do not apply side pressure and curve cutting. The feed should be smooth and avoid the impact of the blade on the workpiece to avoid danger. When dry cutting, do not cut continuously for a long time, so as not to affect the service life and cutting effect of the saw blade; wet film cutting should be cooled with water to prevent leakage.
• Experts suggest that after the saw blade is installed, it should be idling for a few minutes to confirm that there is no sway or beating, and then try cutting a few knives on the grinding wheel or refractory brick, and then the normal work is best. If the blade is not sharp enough, use a silicon carbide grindstone to get the edge.

Warm prompt: The cutting machine must have a safety shield, and the operator must wear protective clothing such as safety clothing, glasses, and masks.

 

 

Certifications

Packaging

Payment&shipping